The downside to this was that it made the screen flicker. Old time video signals were interlaced, which doubled the amount of lines available by interlacing two frames and flicking rapidly between them.

The next thing to set is the deinterlace. You will spot the right one, even if you don’t know what your local standard is just select one after the other and the screen will pop into colour when you have the right one. If you get a weird picture which seems black and white, fuzzy and weirdly offset on the screen, then it’s likely your video standard is not right. This test was conducted in a PAL country, the UK, but your mileage may vary. First, you have to set the video standard. If it were that simple, then you could get started right away, but there are a couple of extra steps before you can play and record. Now all you have to do is plug the yellow composite Video Out of your device to the yellow video plug on the Eas圜AP. This needs to be a powered slot, so no dumb USB 1.0 hubs will do. Install and run the driver from the downloaded file, and if you haven’t plugged your Eas圜AP into the computer, you will be advised to do so. Installing the hardware is easy just plug it into an available USB slot. The Eas圜AP is a USB device with video and audio input sockets to capture and store video on your computer. First, you need to go get the driver for Mac OS X, and that can be obtained here. For this test we will be using an old Ms Pac Man video game we found in the drawer. In this article we show you how to get set up and a few tips on how to configure the sound and video for the best performance. If you have a ton of old video tapes or have some old video game consoles you want to grab walkthrough videos from, this is one of the very best cost-effective ways to do that. The Eas圜AP DC60 is a cheap old school video capturing device which is perfect for capturing old school video sources.

Usb grabber software mac